3LP01SS no.6648-1/4 ultrahigh-speed switching applications p-channel silicon mosfet features ? low on-resistance. ? ultrahigh-speed switching. ? 2.5v drive. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit drain-to-source voltage v dss --30 v gate-to-source voltage v gss 10 v drain current (dc) i d --0.1 a drain current (pulse) i dp pw 10 m s, duty cycle 1% --0.4 a allowable power dissipation p d 0.15 w channel temperature tch 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit drain-to-source breakdown voltage v (br)dss i d =--1ma, v gs =0 --30 v zero-gate voltage drain current i dss v ds =--30v, v gs =0 --10 m a gate-to-sourse leakage current i gss v gs = 8v, v ds =0 10 m a cutoff voltage v gs (off) v ds =--10v, i d =--100 m a --0.4 --1.4 v forward transfer admittance ? yfs ? v ds =--10v, i d =--50ma 80 110 ms continued on next page. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6648 3LP01SS package dimensions unit : mm 2179 [3LP01SS] 92500 ts im ta-1981 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. 0.6 0.25 0.2 1.4 0.45 1 3 2 0.3 1.4 0.8 0.3 0.1 1 : gate 2 : source 3 : drain sanyo : ssfp
3LP01SS no.6648-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit r ds (on)1 i d =--50ma, v gs =--4v 8 10.4 w static drain-to-source on-state resistance r ds (on)2 i d =--30ma, v gs =--2.5v 11 15.4 w r ds (on)3 i d =--1ma, v gs =--1.5v 27 54 w input capacitance ciss v ds =--10v, f=1mhz 7.5 pf output capacitance coss v ds =--10v, f=1mhz 5.7 pf reverse transfer capacitance crss v ds =--10v, f=1mhz 1.8 pf turn-on delay time t d (on) see specified test circuit 24 ns rise time t r see specified test circuit 55 ns turn-off delay time t d (off) see specified test circuit 120 ns fall time t f see specified test circuit 130 ns total gate charge qg v ds =--10v, v gs =--10v, i d =--100ma 1.43 nc gate-to-source charge qgs v ds =--10v, v gs =--10v, i d =--100ma 0.18 nc gate-to-drain miller charge qgd v ds =--10v, v gs =--10v, i d =--100ma 0.25 nc diode forward voltage v sd i s =--100ma, v gs =0 0.83 1.2 v marking : xa switching time test circuit pw=10 m s d.c. 1% 0v --4v v in p. g 50 w g d i d = --50ma r l =300 w v dd = --15v v out 3LP01SS s v in 0 0 --0.01 --0.02 --0.03 --0.04 --0.06 --0.07 --0.08 --0.09 --0.10 --0.4 --0.05 --0.8 --1.2 --1.6 --2.0 --0.2 --0.6 --1.0 --1.4 --1.8 i d -- v ds v gs = --1.5v --3.5v --6.0v --2.0v --4.0v --3.0v --2.5v 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --4.0 --3.5 0 --0.02 --0.04 --0.06 --0.08 --0.10 --0.12 --0.14 --0.16 --0.18 --0.20 i d -- v gs v ds = --10v 0 0 -- 1 -- 2 -- 3 5 -- 4 10 -- 5 15 20 25 -- 6 30 --7 --8 --9 --10 r ds (on) -- v gs ta=25 c i d =30ma 50ma r ds (on) -- i d it00077 it00079 it00080 it00078 ta= --25 c 25 c 75 c static drain-to-source on-state resistance, r ds (on) -- static drain-to-source on-state resistance, r ds (on) -- drain current, i d -- a drain current, i d -- a drain-to-source voltage, v ds -- v gate-to-source voltage, v gs -- v gate-to-source voltage, v gs -- v drain current, i d -- a --0.01 1.0 --0.1 23 57 23 100 7 5 3 2 10 7 5 3 2 v gs = --4v ta=75 c 25 c --25 c
3LP01SS no.6648-3/4 0 0 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 -- 8 1.6 0.6 0.8 1.0 1.2 1.4 0.2 0.4 -- 9 --10 v ds = --10v i d = --0.1a 0 1.0 -- 5 10 7 5 3 2 7 5 3 2 --10 --15 100 --20 --30 --25 f=1mhz it00085 it00087 it00088 ciss coss crss --0.01 23 57 10 7 5 3 2 7 5 3 2 --0.1 1000 100 it00086 v dd = --15v v gs = --4v t f t r t d (off) t d (on) --60 4 2 --40 6 --20 8 10 0 12 14 20 40 16 60 18 80 100 120 140 160 i d = --30ma, v gs = --2.5v i d = --50ma, v gs = --4.0v it00083 it00084 it00081 it00082 static drain-to-source on-state resistance, r ds (on) -- static drain-to-source on-state resistance, r ds (on) -- static drain-to-source on-state resistance, r ds (on) -- diode forward voltage, v sd -- v forward current, i f -- a i f -- v sd drain-to-source voltage, v ds -- v ciss, coss, crss -- v ds ciss, coss, crss -- pf drain current, i d -- a sw time -- i d switching time, sw time -- ns total gate charge, qg -- nc v gs -- qg gate-to-sourse voltage, v gs -- v ambient temperature, ta -- c r ds (on) -- ta drain current, i d -- a forward transfer admittance, ? yfs ? -- s ? yfs ? -- i d drain current, i d -- a r ds (on) -- i d drain current, i d -- a r ds (on) -- i d --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --1.1 --0.01 --0.1 3 2 7 5 3 2 v gs =0 --25 c 25 c ta=75 c --0.01 0.01 --0.1 1.0 7 5 3 2 7 5 3 2 0.1 3 2 7 5 3 2 v ds = --10v ta= --25 c 25 c 75 c --0.01 1.0 --0.1 10 7 5 3 2 100 7 5 3 2 3 2 7 5 3 2 v gs = --2.5v --0.0001 --0.001 1000 7 5 3 2 100 7 5 3 2 10 23 23 57 v gs = --1.5v --25 c --25 c 25 c ta=75 c ta=75 c 25 c
3LP01SS no.6648-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of september, 2000. specifications and information herein are subject to change without notice. ps 0 0.20 0.10 0.05 0.15 0 40 120 160 80 20 100 140 60 it02381 ambient temperature, ta -- c p d -- ta allowable power dissipation, p d -- w note on usage : since the 3LP01SS is designed for high-speed switching applications, please avoid using this device in the vicinity of highly charged objects.
|
